Welcome to the {KN} Kill Noobie Clan Forums!
Welcome Guest [Log In] [Register]
We hope you enjoy our servers enough to join us here and talk directly to us!

Feel free to register for our forums, take a seat, make yourself comfortable, stay awhile!

Shoot ya later!

{KN} Clan



Click HERE to reigister for our forums!

Username:   Password:
New Reply
Manufacturing method of stainless steel pipe
Topic Started: Jul 31 2017, 11:00 PM (61 Views)
meishengchao
Commander
According to the different production methods can be divided into hot-rolled tube, cold-rolled tube, cold-drawn tube, extrusion pipe. 1.1, hot-rolled stainless steel seamless pipe is generally produced in the automatic rolling mill unit.202 grade stainless steel seamless pipe weight The solid tube is inspected and cleared of surface defects, cut into the required length, centered on the end face of the perforation of the tube, and then sent to the heating furnace for perforation. In the perforation at the same time continue to rotate and forward, in the roll and the role of the head, the tube gradually formed inside the cavity, said capillary.1mm 304 Woven Stainless Steel Wire Mesh Panel And then sent to the automatic rolling mill to continue rolling. Finally, the whole machine is the whole wall thickness, the sizing machine to achieve the specifications. The use of continuous rolling mill production of hot-rolled seamless steel pipe is a more advanced method.����ѧݧ� �� ���ӧ֧���ڧ֧� SS400 c ��֧����ڧ��ӧѧߧߧ�� ���ѧݧ� 1.2, if you want to get smaller and better quality seamless pipe, must use cold-rolled, cold drawn or a combination of the two methods. Cold rolling is usually carried out on a two-roll mill where the steel pipe is rolled in a ring-shaped bore formed by a variable cross-section round hole and a stationary tapered head. The cold drawing is usually carried out on a single chain or double chain type drawing machine of 0.5 to 100T.high quality spring 0.05mm stainless steel wire
Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · General Discussion · Next Topic »
New Reply