| We hope you enjoy our servers enough to join us here and talk directly to us! Feel free to register for our forums, take a seat, make yourself comfortable, stay awhile! Shoot ya later! {KN} Clan Click HERE to reigister for our forums! |
| Select parquet | |
|---|---|
| Tweet Topic Started: Jun 13 2016, 10:38 PM (89 Views) | |
| meishengchao | Jun 13 2016, 10:38 PM Post #1 |
|
Commander
|
Appearance quality parquet: brushing paint surface gloss, the film fullness even if, with or without needle granular, with or without indentation, planing marks. Show material without obvious defects. Wood light weight outdoor tile flooring floor surface should not have decayed, dead knots, knotholes, wormholes, cracks, and other defects leather folder. Peripheral joints, slot complete. Parquet dimensional tolerances meets the requirements: parquet Dimensions tolerances length, width, whether thick and Products same; parquet tenon size stitching is tight, smooth, by sampling multiple 2ft high fencing panels supplier floors, a flat the glass surface or ground assembly, watch their combined tightness, and whether its surface smooth touch. Engineered wood flooring formaldehyde emission: using urea-formaldehyde resin production of laminated wood floor kenya flooring, there is this problem, if excessive formaldehyde released into the air, will be harmful to the human body. As in the process of laying, already smell the more pungent smell of formaldehyde, formaldehyde concentration in the air it has been exceeded. The moisture content of the parquet: moisture content usually reaches about 12% of the basic qualification (different regions, different water content standards). Adhesive Properties parquet: parquet adhesives are used when manufacturing finishing pressing at the plate surface, so glued directly affect the results and the quality of life. Gluing quality may reflect the quality of the adoption of two properties namely impregnation stripping and bonding strength. These two indicators will be measured on the same test specimen after the water has a temperature treatment, impregnation peel values as low as possible, the higher the value, the better the bonding strength. |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · General Discussion · Next Topic » |






8:59 PM Jul 10